Description
DJI Ronin 3-Axis Brushless Gimbal Stabilizer
| Electrical and Mechanical | |
|---|---|
| Motor Type | 3 x Brushless |
| Working Current | Static Current: 300 mA at 16 V Dynamic Current: 600 mA at 16 V Locked Motor Current: Maximum of 10 A at 16 V |
| Sensors | IMU (inertial measurement unit) Temperature sensor |
| Processing | DJI 32-bit DSP processor |
| Performance | |
|---|---|
| Precision of Control | ±0.02° |
| Maximum Controlled Rotation Speed | Pan Axis: 90°/sec Tilt Axis: 100°/sec Roll Axis: 30°/sec |
| Controlled Rotation Range | Pan Axis Control: 360° Tilt Axis Control: 45° up to 120° down Roll Axis control: ±25° |
| Receiver | |
|---|---|
| Frequency | 2.4 GHz for proprietary Ronin transmitter |
| Expandability | 1 x Expansion port for third-party D-Bus/PPM receiver |
| Connectivity | |
|---|---|
| Wireless | Bluetooth for Assistant Software |
| Wired | 1 x Interface for DJI Lightbridge |
| System Requirements | |
|---|---|
| Assistant Software | Desktop Windows (32- or 64-bit): 8, 7, XP SP3 Mobile iOS: 7.1 or above Android: 4.3 or above |
| Hardware | Mobile iPhone: 4s, 5, 5s iPod touch: 4, 5 iPad: 3, 4, mini |
| General | |
|---|---|
| Supported Camera Dimensions | Maximum depth at center of mass on camera base plate: 5.5″ / 140 mm Maximum height measured from top of camera base plate: 8.9″ / 225 mm Maximum width: 7.7″ / 195 mm |
| Supported Camera Weight | Up to 16 lb / 7.3 kg |
| Power Requirements | Battery Type: Ronin 4S Battery Life: Up to 4 hours |
| Power Output | 2 x PowerTap with regulated 12 VDC output 1 x USB type A female supplying 500 mW |
| Operating Temperature | 5 to 120°F / -15 to 50°C |
| Dimensions (W x D x H) | 24.4 x 11 to 18 x 19.7″ / 620 x 280 to 380 x 500 mm |
| Weight | 9.3 lb / 4.2 kg |
Tags: dji, ronin, gimbal, stabilizer